Hardware Installation Guide

13
Chapter 2: Hardware Setup
4
Install the M2D17 adapter card:
a
Remove the screw that secures the adapter slot’s cover.
b
Remove the adapter slot’s cover.
c
Align the card’s connectors with the adapter slot, and insert the card into the slot.
d
Put back and fasten the screw that you removed in step 4-a so as to secure the newly inserted card.
5
Put back the upper case removed in step 2 and tighten the srcews.
1
For more information about supported 10GbE or Gigabit network interface cards, please visit
www.synology.com
.