Hardware Installation Guide

14
Chapter 2: Hardware Setup
Add a Network Interface Card
Your FlashStation has a PCI Express expansion slot which allows you to install 10GbE or Gigabit network
interface card for LAN port expansion.
1
To install a network interface card:
1
Press and hold the power button until you hear a beep sound to shut down your FlashStation. Disconnect all
cables from your FlashStation to prevent any possible damage.
2
Remove the 6 screws that secure the main unit, and then pull the top cover in the direction as illustrated below.
3
Remove the expansion slot shield:
a
Remove the screw that secures the adapter slot’s cover.
b
Remove the adapter slot’s cover.