Hardware Installation Guide

After hardware setup is nished, please install DiskStation Manager (DSM) – Synology’s web-based operating
system – on your FlashStation.
Install DSM with Web Assistant
Your FlashStation comes with a built-in tool called
Web Assistant
that helps you download the latest version of
DSM from the Internet and install it on your FlashStation. To use Web Assistant, please follow the steps below.
1
Power on the FlashStation.
2
Open a web browser on a computer connected to the same network as the FlashStation.
3
Enter either of the following into the address bar of your browser:
a nd.synology.com
b ashstation:5000
4
Web Assistant will be launched in your web browser. It will search for and nd the FlashStation within the local
network. The status of the FlashStation should be
Not installed
.
5
Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
1. The FlashStation must be connected to the Internet to install DSM with Web Assistant.
2. Suggested browsers: Chrome, Firefox.
3. Both the FlashStation and the computer must be in the same local network.
Learn More
Congratulations! Your FlashStation is now ready for action. For more information or online resources about your
FlashStation, please visit
www.synology.com
.
Install DSM on FlashStation
3
19
Chapter