User's Manual

Tools and Parts for Component Installation

Please prepare below tools and parts before setting up your Synology NAS:

• A screwdriver

• At least one 3.5" or 2.5" SATA drive (please visit

www.synology.com/compatibility

for compatible drive

models)

Warning:

If you install a drive that contains data, the system will format the drive and erase all existing data.

Please back up any important data before installation.

• Rail mounting kit (please see the

Optional Accessories

section to nd out the suitable rail kit for cabinet

installation)

Warning:

We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy

weight will increase the installation di󰀩culty.

Install Drives

Please follow the steps below for drive installation:

To remove the drive tray, pull out the drive tray handle in the direction as shown in the image below.

Install drives:

•

For 3.5" drives:

Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four

spots indicated below to secure the drive in place.

•

For 2.5" drives:

Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four

spots indicated below to secure the drive in place.

Hardware Setup

Chapter