User's Manual

13
Chapter 2: Hardware Setup
3
Insert the loaded drive tray into the empty drive bay.
Note:
Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
4
Push the handle inward to secure the drive tray.
5
Insert the drive tray key into the drive tray lock, turn the key clockwise (to the "I" position) to lock the drive tray
handle, and then remove the key.
6
Repeat the steps above to install the other drives you have prepared.
7
Drives are numbered as shown below.
1 2 43
5
6
7
8
Note:
If you plan to create a RAID volume, we recommend installing drives of identical size to make the best
use of drive capacity.