Synology RackStation RS819 Hardware Installation Guide
Table of Contents Chapter 1: Before You Start Package Contents Synology RackStation at a Glance Safety Instructions 3 4 5 Chapter 2: Hardware Setup Tools and Parts for Drive Installation Install Rack Mounts Install Drives Start up the RackStation 6 6 6 8 Chapter 3: Install DSM on the RackStation Install DSM with Web Assistant Learn More Appendix A: Specifications Appendix B: LED Indicator Table Synology_HIG_RS819_20180727 2 9 9
Chapter 1 Before You Start Thank you for purchasing this Synology product! Before setting up your new RackStation, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your RackStation. Note: All images below are for illustrative purposes only, and may differ from the actual product. Package Contents Main unit x 1 AC power cord x 1 Rack mount kit x 2 Screws for 3.
Synology RackStation at a Glance 1 4 No. Article Name 1 Power Indicator 2 Power Button 3 LAN Indicator 4 Drive Status Indicator 5 Beep off Button Press to deactivate beep sound when malfunctions occur. 6 Status Indicator Displays the status of the system. For more information, see "Appendix B: LED Indicator Table". 7 Drive Tray 8 Fan 9 Power Port 10 LAN Port 11 RESET Button 12 USB 3.
Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. To prevent the unit from falling over, do not place on carts or any unstable surfaces. The power cord must plug in to the correct supply voltage.
Chapter Hardware Setup Tools and Parts for Drive Installation • A screwdriver • At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models.) Warning: If you install a drive that contains data, the system will format the drive and erase all data. If you need the data in the future, please back it up before installation. Install Rack Mounts Fix the two rack mount kits on both sides with the screws provided.
• For 2.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws in the four spots indicated below to secure the drive. 3 Insert the loaded hard drive tray into the empty hard drive bay. Note: Make sure the drive tray is completely inserted. Otherwise, the drive might not function properly. 4 Press the handle inward to secure the drive tray.
Start up the RackStation 1 Connect one end of the power cord to the power port located on the back of the RackStation and the other end to a power outlet. 2 Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub. 3 Press the power button to turn on the RackStation. Congratulations! Your RackStation is now online and detectable from a network computer.
Chapter Install DSM on the RackStation After hardware setup is finished, please install DiskStation Manager (DSM) – Synology's browser-based operating system – on your RackStation. Install DSM with Web Assistant Your RackStation comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on the RackStation. To use Web Assistant, please follow the steps below. 1 Power on the RackStation.
Appendix A Specifications Item RS819 Compatible Drive Type 3.5"/2.5" SATA x 4 Maximum Internal Raw Capacity 48 TB (4 x 12 TB hard drives) External Device Port LAN Port Size (H x W x D) (mm) • USB 3.0 x 2 • eSATA x 1 Gigabit x 2 • 44 x 430.5 x 295.5 (Not including rack mount kits) • 44 x 478 x 327.5 (Including rack mount kits) Weight (kg) 4.34 kg (Including rackmount kits) System Fan 40x40x20mm x 3 Supported Client • Mac OS X 10.
Appendix B LED Indicator Table LED Indicator Color Status Description Green Static Volume normal Volume not created STATUS Orange Blinking Volume degraded / Volume crashed DSM not installed HDD hibernation Off LAN Green Static Network connected Blinking Network active No network Off Green DISK 1-4 Orange Static Drive ready and idle Blinking Accessing drive Static Drive error / Port disabled1 Off Power Green Off No internal drive Static Powered on Blinking Booting up / Shutt
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PUCHASED BY YOU (THE "PRODUCT"), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ( "SOFTWARE").
request. Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT.
("RMA") number by Synology before shipment and must be returned in accordance with Synology's then current RMA procedures. Customer may contact any authorized Synology distributor or reseller or Synology Support to obtain assistance in obtaining an RMA, and must provide proof of purchase and product serial number when asking for such assistance. For warranty claims, Customer must return the complete Product to Synology in accordance with this Section 3.3 to be eligible for coverage under this Warranty.
USE OR INABILITY TO USE THE PRODUCT, ANY ACCOMPANYING DOCUMENTATION OR SOFTWARE AND ANY OTHER GOODS OR SERVICES PROVIDED UNDER THIS WARRANTY IS LIMITED TO THE AMOUNT ACTUALLY PAID BY CUSTOMER FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES CUSTOMER MAY INCUR AND WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law.
5.8 Severability. If any provision of this Warranty is held by a court of competent jurisdiction to be invalid, illegal, or unenforceable, the remainder of this Warranty will remain in full force and effect. 5.9 Entire Agreement. This Warranty constitutes the entire agreement, and supersedes any and all prior agreements, between Synology and Customer related to the subject matter hereof.
FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
この装置は、クラス A 機器です。この装置を住宅環境で使用すると電波妨 害を引き起こすことがあります。この場合には使用者が適切な対策を講ずる よう要求されることがあります。 VCCI 一 A
