User's Manual

Fingerprint (RD300-FH1 only)

A. Basic

1. Open / Close : Setup fingerprint sensor enable/ disable.

2. Finger No: RD300-FH1 support 2000 fingerprints. Select from 0 to 1999 to config fingerprint.

3. Delete: Delete selected fingerprint number (Finger No).

4. Delete all: Delete all fingerprints.

5. Check Free: Check selected fingerprint number is in use or free.

6. Get Enroll Count: Check how many fingerprint numbers was used.

7. Auto Enroll: Select fingerprint number and click auto Enroll to save fingerprint to reader.

8. Template: Fingerprint’s template. Every fingerprint have unique template.

9. Identify: Identification of the capture fingerprint with database number.

10. Set Auto Identify: Default is auto, set to off will disable fingerprint recognition.

11. Green: Setup fingerprint sensor auto sleep timing. Default is 5 minutes.

12. UID Add: Change prefix to fingerprint numbers.