User's Manual

7
4. Read Card Mode
In this mode, program provided different options for user to choose, after ticked the options,
just click Set to finish the setting procedure, or click Get Current Setting to read current setting
from the reader.
Options
Descriptions
Auto
Automatically read card
Beep
Prompt the beep sound or not.
LED
Flash the LED when read the card.
Same Card Detection
If continuously read the same card, user has to wait around 1.5 sec then
could read again.
Energy Saving Mode
Provide more energy saving method.
(It is not recommend to use in writing card blocks or several cards)
eTag
Read Taiwan ETC eTag format.
5. System Command
This tool provides two system commands; user can use Reboot Reader to reboot the RD200
reader. The other command is Use Factory Default Settings which can restore the reader
settings to initial settings.