User's Manual

SYRIS Xtive Utility User Manual
C. Reader Tab Introduction
1. Reader Reset: Reset online reader. Reader will warm restart.
2. Reader Initial: Initial online reader. All setting will set to factory
default.
3. Get version: Get reader’s firmware version.
4. Get S/N: Get reader’s serial number.
5. Get ID: Get the ID of the reader.
6. Set ID: Input the number to ID field and than click “Set ID” to change
Reader’s ID.
7. Set Baudrate: Select communication Baudrate and than click “Set
Baudrate” to change Reader’s Baudrate.
11