User's Manual

SYRIS Xtive Utility User Manual
8. Set Auto Send: Change data format of TAG from reader to PC client.
9. Set Net Port：Select communication port and than click “Set Net Port”
to change Reader’s communication port.
Ex. Select NET to set transmit data via RJ-45.
Reader will transmit received data to NET, RS232 and RS485 when
you set net port to ALL. But this mode will cause slow transmit speed.
10. Set RSSI Level: Adjust RSSI level (0~250) to filter TAG which have
low RSSI signal in reader.
(This function was available in version 1.30 or above.)
Ex. Set RSSI Level to 120, Reader will receive tag which RSSI are
stronger than 120.
11. Set Gain Level：Adjust Gain level (1~7) to control reader’s read
range.
Level 7 is the max range (default setting), Level 1 is the shortest read
range.
12