User's Manual

SYRIS Xtive Utility User Manual

à Tag Parameters Introduction :

1. Set TAG Active Time: Modify transmits frequency of selected TAG.

TAG Active Time = Multiple x Transmits Frequency

Ex. Set TAG active time to 1 minute:

Multiple (6) x Transmits Frequency (10 sec) = 60 sec

2. Get TAG Active Time: Get the current transmits frequency of

selected tag.

3. TAG Off: Turn off selected TAG. TAG will stop signal transmission

automatically.

(2K/2S TAG can’t access this command)

4. TAG ON: Turn on selected TAG. TAG will start signal transmission

automatically.

(2K/2S TAG can’t access this command)

Note: Click Call button will increase communication speed when you set selected TAG

parameters.