User's Manual

SYRIS Xtive Utility User Manual

7. TAG Beep: Remote TAG to beep. Adjust the beep second to set time

of beep on. (Only for Wristband TAG & Card TAG)

Ex. Set Beep second to 30 and than click “TAG Beep”. TAG will beep

for 3 seconds when received this command.

8. TAG LED Mode: Set selected TAG LED mode. (Only for Wristband TAG

& Card TAG)

- Mark “LED1” and then click “TAG LED Mode”, LED flash indicates

that tag is transmitting the signal.

- Mark “LED2” and then click “TAG LED Mode”, red LED on indicates

the low battery.

9. TAG LED: Turn on the LED of selected TAG. Adjust the LED second

to set time of LED on.

Ex. Set LED second to 30 and than click “TAG LED”. TAG will turn on

the LED for 3 seconds when received this command.