User Manual

DISPLAY SYMBOLS
Panning Linear
Getting started!
Before you start, read the manual fully and make sure the Genie is fully charged.
Connect the appropriate wall plug to the DC
adaptor.
The Genie needs to be turned ON while charg-
ing. During charging the Genie will still enter
standby mode as per normal.
Insert the DC plug into the Genie and check
that the light around the OK button turns or-
ange which means the Genie is charging.
Once fully charged the light will turn green for 5
seconds before turning off entirely.
FIRST TIME SETUP
The following explains how to setup your Genie for the first time.
- Hold down the OK button to turn on the Genie.
- Set the Date
Press ‘OK’ to select the menu item to be changed.
Use the Left and Right keys to select the value to be changed, Up and Down keys will
change the value, and press ‘OK’ to confirm.
-