User Manual

- Set the time
Press ‘OK’ to select the menu item to be changed.
Use the Left and Right keys to select the value to be changed, Up and Down keys will
change the value, and press ‘OK’ to confirm.
- Set the frame rate.
Press left or right to change the frame rate.
This is the speed at which you like to edit and play your videos at once compiled and is used
as the basis of making recording calculations. We recommend 30 fps for North America and
Japan, and 25 fps for Europe and Australasia.
- Scroll down to ‘Go!’ then press ‘OK’ to save your settings.
Taking a panning shot
The following will guide you through the steps required to take a simple panning time lapse or
video shot with the Genie.
ATTACHING TO YOUR TRIPOD.
If you have just taken your Genie out of the box the first thing you will need to do is remove the
panning accessory from the base of the Genie.
Using a finger or thumb, move the release slide
on the back of the Genie towards the unlock
symbol. While holding in the unlock position
pull the panning accessory off the base of the
Genie. (This may be tight when new)
Attach the panning accessory to your tripod
legs using the large threaded hole (3/8 -16
UNC), or onto a tripod head using the small
threaded hole (1/4-20 UNC).