User's Manual

Page 13
thus consumes more battery power.
When the mouse cursor behaves erratically
check the power-indicator LED for power
status, i.e. LED light ashing for power-low;
and follow the instructions in Charging the
Batteries section to recharge the batteries. The
mouse is functional during charging.
The mouse stays connected to your computer
even when it’s turned off. If for any reason the
connection to the system is lost or interference
is detected (erratic cursor movements), rst
check if the micro USB receiver dongle is
plugged in to the computer USB port, then
verify that the presenter mouse is within the
range (up to 33 feet) from your computer.
If the connection is lost it can be xed by
following the instructions in the Connecting
the Mouse to the Computer section to
reconnect the devices.
Make sure the sliding door is closed when
the device is not in use and when traveling in
order to avoid damaging to the door.
Remember to store the micro USB receiver
dongle in the storage compartment when
traveling.
•
•
•
•