FM Modulator (FTR-CBX1021) Included
LTD-1021 User's Manual Notices I
Notices LTD-1021 User's Manual Safety Instructions l. Please read these safety instructions carefully. 2. Please keep this User's Manual for later reference. 3. All precautions and warnings on the equipment should be carefully noted. 4. Please disconnect the LTD-1021 from the AC outlet before cleaning. Do not use sprays, liquids or cleaning detergents for cleaning the LTD1021. 5. Never pour liquids into any openings or directly on the LTD-1021. This could result in fire or electrical shock. 6.
LTD-1021 User's Manual Notices • The LTD-1021 has been exposed to excessive moisture • The LTD-1021 exhibits errors and or does not function according to specification • The LTD-1021 has been dropped or otherwise mechanically damaged DO NOT LEAVE THIS EQUIPMENT IN A NON-TEMPERATURE CONTROLLED ENVIRONMENT. STORAGE TEMPERATURES BELOW -4ºC (20ºF) OR ABOVE 60ºC (140ºF) MAY DAMAGE THE UNIT. Safety Notices To comply with Canadian and U.S.
Notices LTD-1021 User's Manual Safety Notices for the power cord This equipment has a 2 or 3-wire power cord. Replace the power cord if it becomes damaged. Contact your dealer for an exact replacement. In the U.S.A. and Canada, the power cord must be a UL-listed detachable power cord (in Canada, CSA-certified).
LTD-1021 User's Manual Notices Warning: Under no circumstances should the user attempt to disassemble the power supply. The power supply has no user-replaceable parts. Inside the power supply are hazardous voltages that can cause serious personal injury. A defective power supply must be returned to your dealer. Attention: Ne tentez jamais de démonter le bloc d'alimentation.
Notices LTD-1021 User's Manual Safety Notices for Users outside the U.S.A. and Canada PELV (Protected Extra-Low Voltage) Integrity – For ensuring the extra-low voltage integrity of the equipment, connect only equipment with mainsprotected electrically compatible circuits to the external ports. Remote Earths - To prevent electrical shock, connect all local (individual office) computers and computer support equipment to the same electrical circuit of the building wiring.
LTD-1021 User's Manual Notices Laser Compliance Statement for DVD drives The DVD drive for this unit contains a laser. The classification label of the drive is located on the bottom of the drive.
Notices LTD-1021 User's Manual NOTICE OF EMC COMPLIANCE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limitations are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LTD-1021 User's Manual Contents Contents Chapter 1 Introduction 1.1 1.2 1.3 1.4 1.5 1.6 1-1 Unpacking................................................................................... 1-1 Overview ..................................................................................... 1-1 Setting up ................................................................................... 1-1 AC-adapter.................................................................................. 1-1 Remote Control .........
Contents LTD-1021 User's Manual 6.2 Special Navigation ....................................................................... 6-1 6.3 Slide show effects........................................................................ 6-2 6.4 Zoom pictures ............................................................................. 6-2 Appendix A B C D E X A to E A-1 Specifications.............................................................................. A-1 Wall mounting ................................
LTD-1021 User's Manual Introduction Chapter 1 Introduction Thank you for purchasing the LTD-1021. We are confident it will provide you with functionality and ease of use at home or on the road. 1.
Introduction LTD-1021 User's Manual (1) IR-Wireless Audio Headset *2 (2) Speaker (Right/Left) *2 (3) Remote Controller (4) Carry Bag (5) AV Cord (6) Car Cord (Plug Adaptor) (7) AC-DC Adaptor+ Power Cord (8) Packing Box (9) User Manual Please make sure that you have all the above items; if not, contact the dealer where you bought your LTD-1021. If you need to send your LTD-1021 for service or upgrade it is strongly recommended to use the original packing box and materials.
LTD-1021 User's Manual Introduction 1.2 Overview 1.2.1 Front View • IR Receiver Infrared receiver for remote controller ‚ Headset Plug external headset here ƒ POWER Power on and off the unit „ SOURCE Toggle TV/DVD/CATV/AV1/AV2… … PIX See Chapter 2.xxx for more information † CH Change TV channel ‡ VOL Increase or Decrease the volume level ˆ Speaker Right/Left Channel Speaker ‰ IR transmitter Two Channels for Wireless Audio (2.3MHz, 2.
Introduction LTD-1021 User's Manual 1.2.1 Read View • AV INPUT Connect external devices here, like: VCR, PS2, Xbox, Game-Cube, Video Camera, Blue-Ray, LD etc… ‚ AV OUTPUT Connect to external recording or visual devices here, like: DVD-recorder, VCR, TV, or Projector. ƒ ANT „ Stand Attach your antenna or cable here The mobile stand can tilt in various angles, or be removed for mounting the unit on the wall. See Appendix B for more Information.
LTD-1021 User's Manual Introduction 1.2.3 Top View • Play/Pause ‚ Stop playing „ Previous chapter … Eject disc • ƒ Next chapter † DVD/CD disc slot ‚ • FM antenna (see chapter 2.
LTD-1021 User's Manual Introduction 1.3 Setting up To set up the LTD-1021 together with a VCR (for recording TV programs) connect these cables: 1. Connect TV cable to the Antenna jack at ƒ 2. Connect the 3pcs AV cables from the VCR AV-IN to LTD-1021 AVOUT‚. 3. Connect the 3pcs AV cables from the VCR AV-OUT to LTD-1021 AV-IN at • or to an external TV, projector or other display device. 4.
LTD-1021 User's Manual Introduction 1.4 AC-adapter The supplied AC adapter is a universal adapter and can accept input voltages from 100V to 240V. The universal AC adapter will allow you to charge and/or operate your LTD-1021 anywhere in the world. However, the supplied power cord is region specific. You may need to purchase plug adapter in order to plug in the power cord in other countries. Notes: Use only the supplied AC adapter with your LTD-1021.
LTD-1021 User's Manual Introduction 1.
Introduction LTD-1021 User's Manual Most functions are self-explanatory or will be described in related chapters in this manual.
LTD-1021 User's Manual Introduction To change between TV/DVD modes, first power on the unit by pressing the big red power button at the upper-left corner of remote controller, then click on one of two mode keys (TV, DVD). Some keys will not function in certain modes, like changing TV channel will not work in DVD mode and DVD play button will not work in TV mode. If you are in DVD mode and the Play button doesn’t work, click the DVD button one more time.
LTD-1021 User's Manual Introduction 1.6 Operating environment Care should be taken while traveling with or using the LTD-1021 system.
LTD-1021 User's Manual Before you begin Chapter 2 Before you begin Plug in the power cable to the AC-adapter and the AC-cord into the LTD-1021. Then you may turn on the power either on the unit itself or via the remote control. See chapter 1 for locations of buttons and location of connectors if in doubt. 2.1 Video Source There are THREE buttons on the remote control to select the Source, these are: TV / DVD / AV1 (AV2 is not used on the LTD-1021).
Before you begin LTD-1021 User's Manual 2.3 Default Conditions The default settings should be suitable for most people, but if you would like to adjust Brightness, Contrast, Color, Sharpness, Color temperature or fine tune TV channels it’s possible to do so: 1. Turn on the LTD-1021 2. Click the TV button on the remote control 3. Click the Menu (2) button on the remote control 4. Click the Down (6) arrow to select ‘PICTURE’ and press ‘ENTER’ 5.
LTD-1021 User's Manual Before you begin Color temp. You may select three kinds of color temperatures, Cool, Normal and Warm. Choose the one that pleases you, default in Normal. Fine Tuning If the default TV channel is not perfect, you may fine tune the setting here. Note that it will only fine tune the channel you are currently watching. Reset Resets all the above settings to default values (including volume). However V-chip password and it’s setting are not reset. See Chapter 2.
Before you begin LTD-1021 User's Manual Please see the installation pictures below on how to install it easily: 2.7.
LTD-1021 User's Manual Before you begin 2.7.
LTD-1501 User's Manual TV Mode Chapter 3 TV mode Once you have completed the setup procedures stated in Chapter 2 you are now ready to start to watch TV on the LTD-1021 for the first time. 3.1 Antenna setup There are two ways to receive TV on the LTD-1021, once is via a TV-antenna, the other is via a TV-cable. You need to select your preference first before you can watch TV. Here is how to do that: 1. Turn on the LTD-1021 2. Click the TV button on the remote control 3.
TV Mode LTD-1021 User's Manual 3.3 TV Navigation You may navigate the various TV stations in your area by pressing the Channel Up/Down buttons, or enter the number by pressing the numeric keys. If you don’t have the remote control, you may also click the buttons on top of the LTD-1021 to select the channel accordingly. 3.4 Parental control It is possible to child lock the LTD-1021 to avoid young children to watch violent or sexual TV programs.
LTD-1501 User's Manual DVD Mode Chapter 4 DVD mode The DVD player in LTD-1021 can’t only play DVD movies, but it can play VCD movies also. Playing either kind of movie you can easily skip chapter, freeze frames, and play at faster or slower speed. Below some of the standard and some special features are highlighted. Note that depending on the movie you are watching some features that might not be available. Note: Several DVD movies are locked for certain regions, and they are region coded.
Batteries LTD-1501 User's Manual Once you are watching a movie you may choose to Pause (;) it (you will see a frozen picture, while Stop (<) will show you our DVD screen. You may play the movie faster forward (8) or rewind (7) it in 2x/4x/8x/16x and 32x speeds, do this by clicking the forward or rewind buttons. To move even faster than fast forward/rewind you may skip entire chapters, you can do this by clicking the Next (:)/ Previous (9) Chapter buttons.
LTD-1501 User's Manual DVD Mode 4.5 Changing camera angle Very few movies provide several angles; Movies of scenery or sexual content might do this though. While watching such a movie, press the ‘ANGLE’ button to select different camera angles.
LTD-1021 User's Manual Music mode Chapter 5 Music mode Your LTD-1021 is an excellent music center, and you may either listen to Audio CDs or MP3 CDs that you have complied yourself. If you make your own CD we recommend you to put the songs in directories, it’s easier to navigate. You need to be under DVD mode to play music, press the DVD button on the remote control or the source button until “DVD” is displayed. 5.
Music mode LTD-1021 User's Manual will disappear and you will get a list of all the songs on the disc. Pressing the ‘Random’ button will play any song randomly selected from the entire collection. 5.3 Other functions You may also want to repeat a small portion over and over again from a song. You may do this by pressing the (A-B) button, press once for the start of the segment and once for the end of the segment. This segment will play endlessly until you press the (A-B) button again.
LTD-1021 User's Manual Photo mode Chapter 6 Photo viewing mode Another great feature of the LTD-1021 is it’s ability to browse digital images of CD or DVD discs. You may create these discs by yourself at home on your computer and later watch them on the LTD-1021. You need to be under DVD mode to display photos, press the DVD button on the remote control or the source button until DVD displays. 6.
Photo mode LTD-1021 User's Manual 6.3 Slide show effects To start a slideshow, press the Play (4) button It’s possible to display some nice transition effects in the slide show, press the ‘Display’ button and you may choose from 15 different transitions! 6.4 Zoom pictures It’s also possible to zoom into the pictures to see details more clearly. Press the ‘Zoom’ button, and the default zoom is displayed, which is 100%.
LTD-1021 User's Manual Appendix LTD-1021 User Manual Appendix A to E Page 1-5
LTD-1021 User's Manual Appendix A Specifications ITEMS Display SPECIFICATION Screen Size 10.2” TFT-LCD Panel Resolution 1024 x 768 (XGA) Display Area (opening) H x 304.128 mm x 228.096mm Pixel Pitch 0.297 mm x 0.297mm Display colors 16.2M colors (6 bit + FRC) Contrast Ratio 400 : 1 (typ.) Brightness 250 cd / m2 (typ.
LTD-1021 User's Manual Appendix B Wall mounting It is possible to wall mount the LTD-1021, since it supports standard VESA mounting. The mounting holes are 100mm apart from each other in a square. To mount the LTD-1021 you need to first remove the stand: 1. Remove the four screws for the stand 2. The rear of the LTD-1021 is now plain 3. Follow the instruction manual for the VESA mounting bracket you bought separately on how to install it 4.
LTD-1021 User's Manual Appendix C Trouble shooting If you have some problems with the LTD-1021, please check these quick guides, hopefully they will resolve your problem. TV mode: • • • • Make sure that the TV antenna or cable is inserted Select the correct antenna mode, see Chapter 3.
Appendices LTD-1501 User's Manual Other troubles: • • • • • • Check the power cable is inserted both to the wall outlet, to ACadapter, and to the LTD-1021. Make sure there are fresh batteries in the remote control and the battery polarity is correct. To listen to wireless Audio, make sure there are fresh batteries in the headset, only headset with frequency of 2.3 and 2.8MHz can be used. It’s not possible to mute the audio on the LTD-1021 and listen to wireless Audio same time. Both are muted.
LTD-1021 User's Manual Appendix D Maintenance To clean the LTD-1021, wipe it with a soft dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solution or a weak detergent solution.
LTD-1021 User's Manual Appendix E Returning your LTD-1021 After you have enjoyed your LTD-1021 for many years, and feel it’s time for it to retire, please return it and any accessories to your dealer or the manufacturer. Your dealer or manufacturer will accept these and will responsibly recycle the components. Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
