User's Manual

SHENZHEN SYS IoT CO., LTD. 26 / 34
Tel: [phone]
Fax: [phone]
Mail: [e-mail]
Http://www.sysiot.cn
Add: Room 716, Yiben E-Commerce
and Industrial Park, Chaguang Road
Nanshan District, Shenzhen, China
Post Code：518055
the button of “Read Single” as the below and search the new tags. You can find the new data “E2 00
11 22 33 44 55 66 77 AA BB CC”.
Picture54
3.5.4 Appointed EPC lock tags
Lock tag: the operation of locking the data of tag memory. As below:
1）Lock the commands of destroy and access, and stop or promise to read/write the commands.
2）Lock the EPC, TID ROM, stop or promise to read the data into the ROM.
3）Lock the ROM of user’s block, stop or promise to read user’s ROM.
4）Commands of Perma-Lock, EPC, TID&User’s block.
MemBank
Lock Type
Read/Write Control
EPC
TID
User
Unlock
Read/Write ROM without access password
Lock
Secured status(access password=0):
Read/write without password.
Open status(access password≠0):
Cannot write and you need to enter the
secured status after input the correct access
password
Perma-unlock）
Read/Write ROM without access password,
and you can read/write permanently, but
cannot do the operation of locking.
Perma-Lock
Only read but cannot write permanently
cannot do the operation of locking.
Reserved
（Kill Pwd）
（Access Pwd）
Unlock）
Read/Write ROM without access password
Lock
Under the tag secured status (access
password=0) Read/Write ROM without
access password,
Open status(access password≠0): Cannot
write. You need to input the correct access
password and keep the tags enter into the
secured status.