User's Manual

SHENZHEN SYS IoT CO., LTD. 30 / 34
Tel: [phone]
Fax: [phone]
Mail: [e-mail]
Http://www.sysiot.cn
Add: Room 716, Yiben E-Commerce
and Industrial Park, Chaguang Road
Nanshan District, Shenzhen, China
Post Code：518055
 CNT，tags inventory times, Ant- antenna interface；
 Tempr，The temperature of the reading temperature tags；
 SerRssi, the temperature read tags, electronic tags received the launch of the rf signal intensity,
read/write device, SerRssi is a relative value, positive, the range is 0 ~ 31. Temperature SerRssi
labels within the scope of the 13 ~ 21, the measured temperature value is the most accurate,
recommended value SerRssi = 18.User should be the launch of the rf signal power, control,
speaking, reading and writing device module makes tag response SerRssi within the scope of the
measuring temperature. Note that the front and the RSSI is different.
3.6.1 Get Temperature Tags
The process of reading the temperature: Reading EPC-> Setting the tags inventory times->Setting
the access password-> Reading the value of the temperature tags.
（1）Inventory the ID of the temperature tags. Please click the “Inventory Sensor EPC”
Picture 63
It shows the ID of the temperature tags “00 00 00 0000 0000 0000 00 41 02”.
（2）Select the number(30) of inventories for each temperature tags. Picture64
Picture64
（3）Input the access password as below:
Picture65
（4）Click“Get Temperature One” , and inventory the EPC tags one by one.
Picture66
Reading temperature tag “00 00 00 0000 0000 0000 00 41 02” 30 times as bleow: