User's Manual

www.looket.com
User Guide Manual - 18
1. Tap NAVIGATION on the
Main menu. After reading
the important message,
click I AGREE.
2. Select your language,
voice, distance units,
keyboard preference and
map.
3. After choosing your map, the device is auto-searching for GPS
signal, and then its COM port and baud rate which the device is
supporting will be set automatically.
4. You would probably see your current valid GPS position on the
map after successful launch.
5. If you tap anywhere on the map area, the Main menu of the
NAVIGATION is shown. On the bottom of the screen you can see
useful information about your current position - street name with
numbers.
※ The process of the first launch is subject to be passed according
to countries and maps.
After successful launch, you
would probably see your current
valid GPS position on the map.
If you see only grey screen after
launch, you should probably
check your GPS status first and
wait for valid GPS signal.
It takes some time to get valid signal from available satellites. First of all,
tap on the grey screen to open the Main menu and find a GPS status
button.