User's Manual

GlobalTrak™Assembly203026,E‐SealwithZigBeeInterfaceV2OperationManual
Prepared: J. Carn Date: May 24, 2012 Page 8 of 11

Figure5a&5b.SearchingforAssetMonitoringUnit.LEDsflashing.

2.1.2:PowerOff

1. RemovetheboltandwaitfortheredLEDtoflashtwice.


Figure6.Removebolt,redLEDflashestwice.

2. Inserttheboltagain,andremoveitafter1‐3seconds.
Note
:A solid red light will show for 3 seconds, indicating that the device will shut down after sending a
shutdownmessage.
