Manual Thermoplus

Thermoplus
25
EN
Frost protection program
This program is ideal for when you want to
protect against frost damage in premises
which are standing empty or unused for
long periods, such as holiday homes and
warehouses, or when you will be away from
your main home for longer than usual. You set
a desired value (set point) and the thermostat
regulates the temperature in line with this.
The normal settings remain in the memory
and the thermostat reverts to them when
the frost protection program is deactivated.
Temperature can be set to a level between 5
°C and 15 °C, the factory setting is 10 °C.
Select with
The set temperature will flash, navigate to the
desired temperature.
Press
and navigate to SET.
Navigate to FP,
select with
Confirm with
Important
The heating system is a highvoltage system
and any faults must therefore be corrected by
an authorised electrician.
Trouble shooting
Error codes
When a fault occurs, the thermostat turns the
heating off. The LED flashes red and green
alternately. The LCD display shows a flashing
error code as follows:
Error 3: Short circuit sensor.
Error 4: Interruption sensor.