DNV ELEKTRA V 2018 2022

Job Id: 262.1-014988-5
Certificate No: TAE00002K6
Form code: TA 251
Revision: 2016-12
www.dnvgl.com
Page 2 of 2
Product description
Fan heater with the following types and sizes:
Type:
Power
Voltage
Frequency
Ingress
Protection
ELV3331
3000W
230V 1 ph
50 / 60Hz
IP 44
ELV3333
3000W
400V 3 ph
50 / 60Hz
IP 44
ELV3344
3600W
440V 3 ph
50 / 60Hz
IP 44
ELV5323
5000W
230V 3 ph
50 / 60Hz
IP 44
ELV5333
5000W
400V 3 ph
50 / 60Hz
IP 44
ELV6344
6000W
440V 3 ph
50 / 60Hz
IP 44
ELV650
6000W
500V 3 ph
50 / 60Hz
IP 44
Application/Limitation
For dry and wet accommodation spaces. Only for fixed installation. Installation is to be considered in
each case. If not constructed with an inclined top plate, a perforated plate of incombustible material
inclined about 30
o
shall normally be mounted above each heater.
Type Approval documentation
Technical info:
“Frico Elektra V”
Test reports:
Intertek Certificate no. 1310876 dated 2014-06-04. Intertek test report no. 1402511STO-001 dated
2014-03-27.SEMKO type test report no. 304902-01 dated 2004-04-26.
PACFORSK report “VEAB and FRICO fan – Vibration testing”, report no. 274 210 dated 2004-05-11.
Letter from VEAB to DNV dated 2004-05-13 with technical data included.
Tests carried out
Type tests in according to IEC 60335-2-30, Vibration test.
Marking of product
FRICO – ELEKTRA – type designation
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the Type approval is
complied with and that no alterations are made to the product design or choice of materials.
The main elements of the assessment are:
• Inspection on factory samples, selected at random from the production line (where practicable)
• Results from Routines (RT) checked (if not available tests according to RT to be carried out)
• Review of type approval documentation
• Review of possible change in design, materials and performance
• Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate.
Assessment to be performed at 2 and 3.5 year and at renewal.
END OF CERTIFICATE