TPI 38 CFC201402

ManualsBrandsSystemair ManualsAir Distribution ProductsCFC-HF-14-557x557x80 - Filter for CFC, class H14, rubber gasket

Clean areas

1 / 11

CFC

Clean Filter Cassetes for Clean Areas

Ordering codes

Ordering codes – example:

CFC - C - 1 - H - 535×535×80 - VR - RAL9010

Clean ltering cassette, „Classic“ design, front panel tting surface with an alignment rim, with horizontal connection, lter dimensions 535×535×80,

front panel VR mounted by 1 central bolt, white surface.

NOTES:

1. See „Detail“ in Fig. 1... Fig. 4. Not dened for design type W (Wall).

2. For the design type R (rectangular supply) the only possible supply orientation is horizontal.

3. Details of mounting can be found in Fig. 8 - 10, for a specied „S“ or T-bar „T“ ceiling type and raster size the clean hood will be delivered including a mounted ledge

(position 4 on Fig. 8, 9) to enable adjustment to the installation opening size. If type P or no type is specied, the clean ltering cassette will be delivered without the ledge.

4. If no RAL color nish is dened, so RAL 9010 will be delivered.

5. If no lter class is dened, so the class H14 will be delivered as standard.

6. For some CFC with circular connection there are 2 standard dimensions dened. If no dimension of connection is dened, the the bigger one

of the two possible dimensions will be delivered. See the lter cassettes size tables.

7. Front panel xing (ceiling installation); type1: 1 bolt in center of the plate; type 4: 4 bolts in the edges of the plate

CFC-

Design type

Simple

With alignment rim

Horizontal

Vertical

Length × width × thickness (80 mm as standard) L × W × T

Front panel – diffuser

NOVA-A for type W

Perforated panel, fixing type 4, type C, B, G, R

SINUS-F, fixing type 4, only square dimensions, type C, B, G, R

ADQ, fixing type 1, only square dimensions, type C, B, G, R

VVKR, fixing type 1, only square dimensions, type C, B, G, R

VVKN, fixing type 1, only square dimensions, type C, B, G, R

White RAL9010, 30% gloss

Other RAL colors

RAL9010

RALxxxx

Classic

Basic

Gel filter gasket

Rectangular inlet (low height profile)

Wall (for mounting into the wall)

Front panel fitting surface

Supply

Filter dimensions

Surface finish

Ceiling type, raster

S600

S625

T600

T625

Plasterboard

Metal plate ceiling, raster 600

Metal plate ceiling, raster 625

T-bar ceiling, raster 600

T-bar ceiling, raster 625

Acc. to EN1822 H11 ... H14Filter class

DN (mm) DN100 ... DN315Connection nominal size

Summary of content (11 pages)

PAGE 1
Clean areas | CFC Clean Filter Cassetes for Clean Areas Ordering codes CFC- Design type Classic Basic Gel filter gasket Rectangular inlet (low height profile) Wall (for mounting into the wall) C B G R W Front panel fitting surface 1 Simple With alignment rim 2 1 Supply 2 Horizontal Vertical H V Filter dimensions Length × width × thickness (80 mm as standard) Connection nominal size 6 DN (mm) Filter class 5 Acc.
PAGE 2
/ 11 | Clean areas Description Design The clean filtering cassettes for clean areas are intended for filtering the air supplied into areas with high requirements for hygiene and dust-free environment, such as operating rooms, intensive care units, laboratories, dust-free manufacturing areas etc. It is possible to install filters that have a filtration class up to H14 with rubber sealings or gel gaskets into the filtering cassettes for the highest possible tightness.
PAGE 3
| Clean areas 3 / 11 CFC-C • Whole box hermetically welded • Ceiling installation • Flat rubber gasket filter sealing surface • Air tight circular connection, horizontal or vertical • Front plate fixing type 1 (1 central bolt) or type 4 (4 edge bolts) • Front plate fitting surface type 1 (for plaster ceiling) or type 2 (for T-bar or plate ceiling) 50 DETAIL: Fitting surface type 1 (CFC-C1...) for front panel øD hor øD ver A1 Hhor (resp. Hver ) A1 × B1 Fitting surface type 2 (CFC-C2...
PAGE 4
/ 11 | Clean areas CFC-B • "dirty side" of the box spot welded, "clean side" hermetically welded • Front plate fixing type 1 (1 central bolt) or type 4 (4 edge bolts) • Ceiling installation • Front plate fitting surface type 1 (for plaster ceiling) or type 2 (for T-bar or plate ceiling) • Flat rubber gasket filter sealing surface • Air non-tight circular connection, horizontal DETAIL: Fitting surface type 1 (CFC-B1...
PAGE 5
Clean areas | 5 / 11 CFC-G • Whole box hermetically welded • Ceiling installation • Blade gel gasket filter sealing surface (absolute tight) • Air tight circular connection, horizontal or vertical • Front plate fixing type 1 (1 central bolt) • Front plate fitting surface type 1 (for plaster ceiling) B1 50 øD hor A1 × B1 50 DETAIL A1 Hhor (resp. Hver ) øD ver Fig.
PAGE 6
/ 11 | Clean areas CFC-R • Whole box hermetically welded • Ceiling installation • Box height 290 mm for low ceiling spaces • Flat rubber gasket filter sealing surface • Flanged rectangular connection, horizontal • Front plate fixing type 1 (1 central bolt) or type 4 (4 edge bolts) CFC-R • Front plate fitting surface type 1 (for plaster ceiling) or type 2 (for T-bar or plate ceiling) Lh 160 DETAIL 283 290 100 20 C 25 C A1 DETAIL: Fitting surface type 1 (CFC-R1...
PAGE 7
Clean areas | 7 / 11 CFC-W • Whole box hermetically welded • Wall installation • Flat rubber gasket filter sealing surface • Air tight circular connection, horizontal • Front grille slide-in fixing H 646 50 100 CFC-W 8 25 342 ø19 Fig. 5: Wall clean filtering cassette CFC-W WALL - type 1 panel fitting surface Filter dimensions A×B×T Label - dimension H (mm) C F C-W- 3 0 5 × 6 1 0 × 8 0 305 × 610 × 80 278 C F C-W- 3 0 5 × 6 1 0 × 1 5 0 305 × 610 × 150 348 Tab.
PAGE 8
/ 11 | Clean areas Technical parameters 275 250 Rubber gasket filter - H14 225 Initial pressure drop (Pa) 200 175 Gel gasket filter - H14 150 125 100 75 50 25 0 0,10 0,15 0,20 0,25 0,30 0,35 0,40 0,45 0,50 0,55 Filter - face velocity (m/s) Diagram 1: Relation between filter face velocity and pressure drop on filtering cassettes without diffuser plate, equipped by 80 mm thick H14 filter with gel or rubber gasket respectively Filter dimensions (mm) 800 575×575 557×557 700 545×545 535×
PAGE 9
Clean areas | 9 / 11 Accessories Front diffuser panels, ventilation grilles Ledge for mounting into a metal plate ceiling or T-bar ceiling The clean filtering cassettes are delivered with diffuser panels, or grilles, respectively. From the design and parameter perspective they are identical to the standard systemair products, the only difference is in the outer dimensions. Further information about the parameters is therefore available in the technical documentation for the standard products.
PAGE 10
| 10 / 11 Clean areas Corresponding 1) VN Front panel for the clean filtering cassette VR AQ SF PP NA Front panel depiction VVKN-A TPI-31 VVKR-A TPI-19 ADQ TPI-21 SINUS-F TPI-56 - Mounting type 1 1 1 4 4 NOVA-A NOVA catalogue SLIDE-IN Panel shape square square square square square rectangle Installation ceiling ceiling ceiling ceiling ceiling wall Dimensions (mm) S1 305 × 305 S2 457 × 457 S3 535 × 535 S4 545 × 545 S5 557 × 557 S6 575 × 575 S7 610 × 610
PAGE 11
Clean areas Mounting | 11 / 11 1 The clean filtering cassettes that are intended for ceiling 2 installation are mounted by suspension into a supporting ceiling. For this purpose they are equipped with suspension 4 ears. The details of embedding for the respective types of suspension ceilings are demonstrated on Fig. 8 - 10. Clean 6 filtering cassettes with type 1 fitting surface are by default intended for installation into a metal plate ceiling suspension 3 ceiling (Fig.