208121 DUCT COVER VTR150 200 300 500 VTC200(A004)

2
|
Duct cover parts
1 Attach two wooden studs according to the width of
the unit. Save space between the unit and the wood-
en studs to be able to remove the main unit if neces-
sary. Fasten the rubber strip (pos 2) to prevent
structure-borne sound. Fasten duct cover (pos 3) with
a screw on each side into the wooden studs. Place the
duct cover with the 90° (pos 4) bends inside the
mounted duct cover and adjust to desired height be-
tween 250-400 mm.
On VTR 150 the duct cover closest to the main unit
has cable glands on each side.
2 Fasten the upper duct cover with screws in each side.
208121 | A004