211891 VTR250 CEILING MOUNTING KIT(A001)

2
| Installation options
4 Installation options
4.1 Fitting with battens
2x Batten (minimum 45 x 45 mm)
Battens (E) should be tightened to the
ceiling mounting kit from inside. Battens
can be attached from the front and the
rear or from both sides with added self-
tapping screws (A) and washers (B).
Tighten battens with a ceiling
mounting kit to the main ceiling.
These screws are not included.
Choose them based on your ceiling
structure.
Leave at least a 4 mm gap
between ceiling mounting kit and
false ceiling to prevent vibration
noises.
211891 | A001