INSTALLATION ODS TOPVEX SR 135577 A003

2
|
Mounting ODS
3 Make sure the levelling is done, each foot shall be
supported. Push the ODS against the Topvex unit’s ex-
haust air side. Lead cabling from the damper along
the inner wall of the ODS and through the cable
glands. (Fix cables if necessary with cable strap, not
included.)
4 Mount the brackets to secure the ODS to the Topvex
unit and attach each of the brackets with two M5x16
allen bolts.
5 Break one of the perforated edges on the corner
bracket — make sure it is the edge to the short side of
the ODS (see image). Mount the corner brackets for
the roof. Attach the brackets by bringing the bottom
edge in the area between the door and the frame.
Note:
Make sure to break the correct corner.
135577 | A003