Handbook AQUA 202103

4/36 | AQUA
Design
Diffuser AQUA consists of a pressure equalizing console from two main aluminium profiles. The profiles are connected
by stainless steel thread bolts. The bolts also fix the aluminium profiles that separate the air discharge slots. The
diffuser console is open on the bottom. Inside the consoles there are vertical deflectors, one per each 0,5 m of length.
The deflectors help the air discharge pattern becoming homogenous and correctly oriented. The consoles can be
connected into a multiple segment array by connection pins (accessory CP-HELLA). On both outermost ends of the
array the end caps (accessory EC-AQUA) can be attached to the consoles. They avoid the fluid building materials
(concrete, mortar...) from intruding into the diffuser console during installation and floor finishing. The plenum boxes
PB-AQUA from stainless steel are available for installation with side or bottom duct connections.
Product Parts
AQUA
A
B
B
A
2
3
1
AQUA-DE
A
B
A
B
4
3
1
2
Legend
1 Console
2 CP-HELLA connection pins (accessory)
3 EC-AQUA end cap (accessory)
4 Slot dividing profiles