Installation instruction TOB, TOS, THS, THB en, sv, ru 205815 CE (A004)

GB
Installation of Roof curb TOB |
7
7 Installation of Roof curb TOB
TOB is shaped like roof tiles to fit to one or two (depending on the size of the covering plate) standard concrete roof
tiles (twin-ridge). TOB is intended for roof fan TFSR and is supplied with two 3 m electric cables.
Warning
The electrical installation may only be carried out by an authorized installer.
7.1 Mount the roof curb/covering plate
Fig. 6
1. First fit the seal plate in accordance with the instructions in chapter 6.
2. The covering plate is placed under the upper row of roof tiles and on top of the lower row of roof tiles. The profiled
sides must lie on top of the roof tiles on both sides of the covering plate.
3. On the larger covering plate which does not have a profiled sheet edge, which seals against the edge of the roof tiles,
a sealing strip is fitted, tailored to the profile of the roof cladding at the lower edge. This prevents rain or snow from
entering.
4. Attach the upper edge of the covering plate to the batten with nails or screws.
5. Plate to the batten with nails or screws nailed to the batten.
6. Connect to duct.
205815 | A004