UserManual S SA2 S SA2L202010
Table Of Contents
- Table of Contents
- Introduction
- Warnings
- Operating Conditions
- Installation
- Installation Methods
- Opening Preparation for S-SA2 Installation
- Standard Distances Between Damper Bodies
-  Installation into a Soft Crossing (up to Size 1000 × 800 mm)
- Connecting S-SA2 to “multi” Ductwork Made of Boards
- S-SA2L Installation
-  Installation on the Vertical Duct with a Ledge
-  Installation Directly on the Horizontal Duct
- Electrical Connections
- Operation Manual
- Smoke Damper Functionality Check
- Smoke Damper Inspection
- Warranty Conditions
- Operating Journal
- Warranty Service
34/40 | User Manual S-SA2 & S-SA2L | 201905
Fig. 58: G230 connection scheme; actuator GRUNER Fig. 59: G24 connection scheme; actuator GRUNER
NOTES:
• Caution! Main power supply voltage!
• Parallel connection of several actuators possible.
• Power consumption and switching thresholds must be observed!
• Connect power supply to wire 1+2, actuator drives to position OPEN (1).
Is also wire 3 connected to the power supply, actuator drives to position CLOSED (0).
Fig. 60: Parallel connection of two coupled GRUNER actuators on one Smoke damper
NOTES:
• Caution! Main power supply voltage!
• Supply via isolation transformer.
• Power consumption and switching thresholds must be observed!
• Connect power supply to wire 1+2, actuator drives to position OPEN (1).
Is also wire 3 connected to the power supply, actuator drives to position CLOSED (0).
S1 S2 S3 S4 S5 S6
<5°
<85°
1
N
2 3
LL
AC 230 V
S1 S2 S3 S4 S5 S6
<5°
<85°
1
2 3
–
+
⊥ ~
+
~
AC/DC 24 V
S1 S2 S3 S4 S5 S6
<5°
<85°
1
2 3
S1 S2 S3 S4 S5 S6
<5°
<85°
1
2 3
–
+
⊥ ~
LLN
+
~
AC/DC 24 V (G24)
AC 230 V (G230)