PCA 2 1000D OPERATING INSTRUCTION25055055

Virtual IOs Pool real IOs (signal sources)
AO1
Analog output
•
Analog output A1 (terminals: A, GND)
DO1
Digital output
•
Relay output K1 (terminals: 13, 14)
DI1 - DI3
Digital inputs
(for
4.00 and 5.00 not
available)
•
Digital input D1 (terminals: 1, 2)
•
Timer from time switch
•
MODBUS interface (terminals: A, B)
If only one signal source is available, no further assignment is possible (n.a. = no
assignment).
8.4.2 Analog output “AO”
Menu overview
Function Designation
Control sign. 2A
AO1 Function
Setting of the desired function (see following table).
A1
AO1 Signal
Analog output A1 (terminals: A, GND)
No further assignment possible, n.a. (no assignment) = No
signal assigned.
OFF
AO1 Inverting
Inverting output
Setting of the desired function
Function Designation
OFF
No function
Control sig. 2A
Control signal (factory setting)
MODBUS sig.
17A
Setting via MODBUS register
Operating Instructions PCA-2 1000D2 Programming
L-BAL-E295-GB 1906 Index 001 Part.-No.
28/48