Installation Instruction
Table Of Contents
- 1 Product information
- 2 Overview
- 3 Warnings
- 4 Unloading from trailer
- 5 Transport and storage
- 6 Unpacking
- 7 Duct connections
- 8 Internal components
- 9 Installation
- 10 Electrical connections
- 11 Connection of water heating coil
- 12 Access control system
- 13 Connect accessories in Control unit CU27-C
- 14 Dimensions and weight
- 15 Technical data
- 16 Additional equipment
- 17 Disposal
- 18 EU Declaration of Conformity
- 19 UK Declaration of Conformity
Installation |
25
9.3 Connect the condensation drain
Connect the drainage pipe and drain trap on the exhaust air side at the bottom of the unit, figure 8. Cut the drainage
pipe to required height, see table 3.
Note:
When installed in a non heated place the drain pipe and trap needs to be insulated well to prevent the water
from freezing.
Fig. 8
H
32
60
(mm)
Table 3
H (mm) Max. Negative pressure (Pa)
100 300
135
1
600
180 1000
1
Normal conditions
214958 | A007