Commissioning Record
Table Of Contents
6
|
Function settings
3.3 Temperature (Zone control)
Function
Default setting
Set value
Zone control
Zone control limitation ⊠ None
□ Interlock heating/cooling
None
Interlock heating/cooling
Temperature zone 1 ⊠ No
□ Yes
No
Yes
Temperature control type and set point □ Supply __________°C Supply °
□ Extract
__________°C
Extract
°
□ Room __________°C Room
°
Neutral zone
__________°C
°
If cascade control:
Min supply air temp. limit
__________°C
°
Max supply air temp. limit
__________°C
°
Heating
Type of heater
□ None
□ Water
□ Electric
None
Water
Electric
Type of feedback, heater
□ None
□ Alarm
□ Run indication
None
Alarm
Run indication
If water heater
Pump control
□ None
□ Auto
□ Always running
None
Auto
Always running
Pump stop delay
5 min
min
Pump running when outdoor temp. is
below:
10 °C
°
Hysteresis to allow pump stop
1 °C
°
Freeze protection
□ No
□ Yes
No
Yes
Alarm limit when unit is running
7 °C
°
P-band when unit is running
5 °C
°
Set point when unit is stopped
20 °C
°
162527 | A004