QUICK CONFIGURATION GUIDE ACCESS SW 4 0 1 04 TO 4 6 1 00 157618A008

2
| How to use the configuration wizard
3 How to use the configuration wizard
The configuration wizard is a menu that simplify the procedure to Activate and Configure common accessories and
functions and Allocate it’s in- and outputs. The wizard makes necessary configurations automatically and guide the user
through limited options.
Access the configuration wizard via
in the navigation bar or via the configuration menu.
Note:
The wizard’s availability and content depend on the air handling unit’s model and controller software
version.
If the configuration wizard does not cover the desired accessory or function it can still be configured via the
configuration menu.
3.1 Set up an accessory or function with the configuration wizard
3.1.1 Activation
Configuration > Configuration wizard
Select the type of accessory or function you wish to set up. E.g. if you have installed a water coil for cooling as acces-
sory, select Set up cooler.
Configuration > Configuration wizard
24 Jun 10:31
Set up pressure control
>
Set up cooler
>
Set up changeover
>
Exit to configuration menu > Complete configuration wizard >
3.1.2 Configuration
Configuration > Configuration wizard < Set up “function”
Specify the details of the accessory or function you wish to set up. E.g. If the cooler you wish to set up is of type Water
and that the circulation pump is with an alarm feedback signal.
Configuration > Configuration wizard < Set up
cooler
24 Jun 10:31
Type of cooler
Water
Type of feedback
Alarm
Pump control
Yes
Pump running mode
Auto
Confirm configuration and
continue >
Note:
The amount of steps between different setups may vary. E.g. when configuring pressure control the wizard
makes the necessary configuration steps automatically and only require confirmation of in- and output
allocation and settings.
157618 | A008