QUICK CONFIGURATION GUIDE ACCESS SW 4 0 1 04 TO 4 6 1 00 157618A008

Quick configuration guides |
5
Note:
Default Unit name is either Systemair controller or the unit model name, for example Topvex TR03
HW CAV.
5.1.2 I/O naming
Change the name of an I/O (in-/outputs), for example a temperature sensor, by selecting the desired I/O function in
the Configuration > I/O allocation settings sub menus and changing the menu row Name.
Overview:
Configuration > I/O allocation settings > Analog
inputs
24 Jun 10:31
Analog inputs
Device Position
Supply air temperature
Controller
AI1
Configuration >... > Analog inputs > Supply air
temperature
24 Jun 10:31
Name
Supply air temperature
Original name Supply air temperature
Step by step:
1.
Select Configuration from the navigation icons
2. Select I/O allocation settings
3. Select the submenu related to the I/O to rename (e.g Analog inputs if temperature sensor)
4. Select the I/O function of which to rename (e.g Supply air temperature)
5. Edit the name of the I/O (in-/outputs) by selecting Name.
5.1.3 Sequence naming
Change the name of a heating/cooling sequence by selecting the desired sequence in the Configuration > Func-
tions > Function activation >Heating/Cooling sequence setup menu and changing the menu row Name.
Configuration > ... > ... > Heating/Cooling sequence
setup
24 Jun 10:31
Position
Heating Cooling
Start
Heating
Start
Cooling
Name
SEQ-H
Off
3 0 % 0 %
Cooling 2
>
Configuration >... > Heating/Cooling sequence setup >
Cooling 2
24 Jun 10:31
Name
Cooling 2
Original name Cooling 2
Step by step:
157618 | A008