INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION ZRS CE002

1 Introduction
1.1 Product description
The product is a smoke gas fan with an AC motor.
The product is not supplied with an external speed control or
power switch.
1.2 Intended use
The product is intended to prevent insufficient draft from
stoves, ovens and fire places. The maximum temperature of
transported air is 200 °C.
The product is not applicable for transportation of air that
contains explosive, flammable or aggressive media. The
product is not applicable for locations where there is a risk of
explosion.
1.3 Document description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be
done by approved personnel only.
Speak to Systemair for more information on how to install the
product in different installation locations.
1.4 Product overview
1
5
4
6
2
7
3
1. Casing
2. Protection grille
3. Insulation carpet
4. Name plate with airflow direction arrow
5. Connection box
6. Steel wire
7. Steering rods
1.5 Name plate
32 65
789
41
11
13
12
10
1. Type designation: Product name, dimension and motor
type. Refer to 1.5.1 Type designation page 2.
2. Input power, W
3. Frequency, Hz
4. Certifications
5. Scannable code
1
6. Find more information about the product on the System-
air documentation portal
1
7. Country of production
8. Airflow direction arrow
9. Weight, kg
10. Serial number: part number/production number/produc-
tion date
11. IP class, enclosure class
12. Current, A
13. Voltage, V
1
1. Use a mobile device to scan the scannable code and go to the Systemair documentation portal for more documentation and document
translations.