pl frico swt gb 160111

30
ØG
B
C
A
D
F
E
ØH
30
ØG
B
C
A
D
F
E
ØH
Fan heaters
Dimensions
Fan heater SWT
• Installed directly to the ceiling or suspended from brackets.
• Intended for water temperatures up to +80 °C and 10 bar.
• Two fan speeds.
• Approved by SEMKO.
• Outer casing in galvanised white enamelled steel panels.
Ceiling mounted fan heater with water heat
The SWT fan heater is used for heating entrances,
stores, industrial premises, workshops, sports halls,
garages and shops. The low height means that SWT
can also be recessed into a suspended ceiling.
Fan heater SWT (IP44)
*
1
) Applicable at water temperature 80/60 °C, air temperature, in +15 °C. At lowest/highest airflow.
*
2
) Conditions: Distance to the unit 5 metres. At lowest/highest airflow.
*
3
) ∆t = temperature rise of passing air at maximum heat output and lowest/highest airflow.
*
4
) The air throw data above is valid when the horizontally adjustable air director is used and the outlet temperature is +40 °C and the room
temperature is +18 °C. The air throw is defined as the distance in a straight angle from the fan heater to the the point where the air speed has
dropped to 0,2 m/s.
*
5
) Water volume inside water coil.
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
F
[mm]
ØG
[mm]
ØH
[mm]
SWT02 535 640 705 195 330 135 305 22
SWT12 675 760 825 195 355 160 355 22
SWT22 735 1070 11 3 5 300 415 11 5 430 28
Type Heat
output*
1
[kW]
Air flow
[m
3
/h]
Air flow
[m
3
/s]
Sound
level*
2
[dB(A)]
∆t*
1,3
[°C]
Air
throw*
4
[m]
Air throw*
4
with
extension collar
[m]
Water
volume*
5
[l]
Voltage
[V]
Amperage
[A]
Weight
[kg]
SWT02 7,8/11 700/1100 0,19/0,31 37/53 33/29 2,2/4 4/7 1,2 230V~ 0,4 19
SWT12 14/18 1300/2000 0,36/0,56 44/57 25/22 2,7/4,5 5/8 1,7 230V~ 0,6 26
SWT22 29/40 2500/3900 0,69/1,08 48/60 34/30 4,5/7,5 7/12 3,9 230V~ 1,0 41