VTR 100B LITE Installation and Service manual v2

6
| Delivery, Transport, Storage
Exhaust air
Extract air
Duct connections: Ø 125 mm
3 Delivery, Transport, Storage
3.1 Transport and storage
The VTR 100/B LITE should be stored and transported in such a way that it is protected against physical damage. It
should be covered so dust, rain and snow cannot enter and damage the unit and its components.
Important
• Use the packaging exclusively as transport protection and not as a lifting aid.
• Load and unload the air handling unit carefully.
3.2 Delivery/Unloading
The appliance is delivered in one piece containing all necessary components, wrapped in plastic on a pallet for easy
transportation.
Checking delivery
• Check the packaging and the air handling unit for transport damage. Any findings should be noted on the cargo
manifest.
• Check completeness of the delivery.
Verify that all ordered equipment is delivered before starting the installation. Any discrepancies from the ordered
equipment must be reported to the supplier of Systemair products.
Warning
When opening the transport packaging, there is a risk of damage from sharp edges, nails, staples, splinters
etc.
Unpacking
• Check the air handling unit for visible transport damage.
• Only remove the packaging shortly before assembly.
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
4 Installation
4.1 Unpacking
Verify that all ordered equipment are delivered before starting the installation. Any discrepancies from the ordered
equipment must be reported to the supplier of Systemair products.
Table 1 Included parts
Sticker for kitchen
furniture panel x 1
Brackets for panel
mounting x 2
Screw (bolt) M6x30
DIN 7985 x 4
Nut M6 DIN934 x 4
Modular hook for
kitchen furniture panel
x 4
212962 | v02