VTR 100B LITE Installation and Service manual v2

Table Of Contents

| Installation

4.4 Installation of a kitchen furniture panel

The kitchen furniture panel can be mounted directly on the unit, sides of cabinets or installed as a door. Parts for panel

installation directly on the unit and sides are delivered with the unit.

4.4.1 Mounting the kitchen furniture panel directly on the unit

Fig. 19 Top view

Depending on the kitchen cupboard depth, the unit might

have to be shifted forward for the panel to be aligned

with the cupboards.

Number Explanation

Wall or any other mounting surface

Wood block (if needed, 25–100 mm)

VTR 100/B LITE

Adjustable bolts (15–25 mm)

Kitchen furniture panel (P)

Adjust bolts if shifting distance is less than 25 mm or use wood blocks in case the required distance is greater.

Fig. 20 Installation of bolts

1. Install four M6 bolts into threaded inserts on the unit and lock bolts with hex nuts (figure 20). Bolts protrusion can be

adjusted later.

A cross screwdriver and a 10 mm spanner are needed. They are not included in the package.

212962 | v02