Presafe Production Quality 16 ATEX 8871Q issue 1

This certificate may only be reproduced in its entirety and without any change, schedule included.
DNV GL Presafe AS, Veritasveien 3, 1363 Høvik, Norway, Tel [phone], www.dnvgl.com
Page 1 of 2
[2]
EQUIPMENT OR PROTECTIVE SYSTEM INTENDED FOR USE IN POTENTIALLY EXPLOSIVE
ATMOSPHERES DIRECTIVE 2014/34/EU
[3]
Notification Number:
Presafe 16 ATEX 8871Q
Issue 1
[4]
Equipment, Protective System or components
as listed:
Fans
Type of protection: Ex d, Ex e, EN 14986
(The EU-Type Examination Certificates based on
this notification are listed by the notified body)
[5]
Applicant – Manufacturer or Authorized
representative in the Community
Systemair Sverige AB
Industriv 3, SE 739 30 Skinnskatteberg,
Sweden
[6]
Manufacturing Locations:
As above
[7]
DNV GL Presafe AS, notified body number 2460 for Annex IV in accordance with Article 17 of the
Council Directive 2014/34/EU of 26 February 2014 notifies to the applicant that the manufacturer
has a production quality system which complies with Annex IV of the Directive
This quality system in compliance with Annex IV of the Directive also meets the requirements of
Annex VII, Conformity to type based on Product Quality Assurance.
[8]
This notification is based on audit report listed on page 2
This notification can be withdrawn if the manufacturer no longer satisfies the requirements of
Annex IV
Results of periodical re-assessment of the quality system are a part of this notification.
[9]
This notification is valid until 2022-10-05 and can be withdrawn if the manufacturer does not
satisfy the production quality assurance surveillance
[10]
According to Article 16 (3) of the Directive 2014/34/EU the CE mark shall be followed by the
identification Number 2460 identifying the Notified Body involved in the production control stage.
Date of issue:
2019-09-30
PROD 021
_______________________
Bjørn Spongsveen
For DNV GL Presafe AS
The Certificate has been digitally signed.
See www.dnvgl.com/digitalsignatures for info