EXTERNAL DISPLAY

ManualsBrandsSystemair ManualsAir Handling UnitsControl panel S-E3-DSP - Control panel S-E3-DSP with 10m cable

S-208997

External display unit for third generation

controllers

• Can be used with third generation Corrigo E

or EXOcompact

• Possible distance of up to 100 m between controller

and display unit

External display unit for operation of a third generation

Corrigo E or EXOcompact, with or without built-in

display and buttons. S-208997 offers full external control

of controllers mounted inside of a cabinet, etc.

• Internal and external display can be used

simultaneously

• Casing designed for mounting on wall, device box

or cabinet front

S-208997 is a stand-alone display and conﬁguration

unit intended for connection to a third generation

EXOcompact or Corrigo E. It is available with or without

a connection cable.

Display functions

S-208997 has a backlit display with 4 rows of 20

characters each. The display light is normally dimmed but

is activated when a button is depressed. The display light

will be dimmed again after a period of inactivity.

S-208997 can be connected to a controller with a built-in

display, enabling both displays to be used simultaneously.

The display menu system is handled using seven buttons:





LED indicators

There are two LEDs on the front:

• The alarm LED is marked with a symbol

• The "write enable" LED is marked with a

symbol

The LED indicators have the following functions:

Designation Function Colour

There are one or more

unacknowledged

alarm(s)

Flashing red

There are one or

more remaining,

acknowledged alarm(s)

Fixed red

You are in a dialogue

box where it is possible

to switch to change

mode

Flashing

yellow

Change mode Fixed yellow

revision

05 2013

Summary of content (3 pages)

PAGE 1
S-208997 revision 05 2013 S-208997 External display unit for third generation controllers External display unit for operation of a third generation Corrigo E or EXOcompact, with or without built-in display and buttons. S-208997 offers full external control of controllers mounted inside of a cabinet, etc.
PAGE 2
S-208997 Cabling S-208997 is normally delivered without a connection cable. However, a cable can be ordered separately. The connection cable is available in two versions, 3 m or 10 m. If a connection cable is instead manufactured by the user, its maximum usable length is 100 m. Mounting S-208997 can be mounted on a wall or a device box (cc 60 mm). It can also be mounted on a cabinet front using the supplied magnetic tape. The magnetic strips are pasted onto the back of the unit.
PAGE 3
S-208997 Technical data Protection class Power supply Connection cable Length Connection Type Display Character height IP40 Internal via communication cable from EXOcompact or Corrigo E (Not included as standard) 3 m, 10 m or user-supplied cable, max. 100 m 4P4C quick connection to EXOcompact or Corrigo E (see cable connection diagram below) 26AWG Backlit, blue light, LCD, 4 rows with 20 characters 4.