TOUCH PANEL IMOSV DE

INSTRUCTION
i
Read this instruction before installation
and wiring of the product
S-208998
1
S-208998
Graphic touch display
S-208998 is an external display for connection to a Systemair control-
ler ventilation with two ports. S-208998 permits starting and stopping
an air handling unit, setting extended running time, adjusting setpoints
and viewing alarms. The display is connected to port 2 on Systemair
controller and can be used in combination with expansion units.
Technical data
Protection class IP30
Power supply 24 V DC via terminal 4 (+C) and G0 on
Systemair controller.
Power consumption 50 mA
Connection cable Twisted-pair, 0.25 mm
2
Display TFT-LCD (resistive)
Backlight LED (backlit)
Language English or French, set automatically
depending on the language used in the
Systemair controller
Aspect ratio 4:3
Resolution 320 x 240
Dimensions (WxHxD) 120 x 90 x 27 mm
Communication EXOline
Systemair controller
software version 3.2 or later
Installation
S-208998 is mounted on a wall using the supplied wall bracket. It can also
be mounted on a device box (cc 60 mm). The display can be removed
from the bracket if necessary.
Wiring
S-208998 is connected to the A and B terminals on the communication
port congured for an external display. Power is supplied from +C (termi-
nal 4) and G0 (terminal 2) on Systemair controller. See the gure below.
(4) +C
(2) G0
A
B
Figure 1. Wiring
EMC emissions & immunity standards
This product conforms to therequirements of the EMC Direc-
tive 2004/108/EC through product standardsEN 61000-6-1 and
EN 61000-6-3.
RoHS
This product conforms to the Directive 2011/65/EU of the European
Parliament and of the Council.
Contact
Systemair AB, 739 30 Skinnskatteberg, Sweden
Tel: [phone], Fax: [phone]
www.systemair.com, [e-mail]
EN
10255C
NOV 13