pl tap16r tep44 rtx54 skg30 pdk65 rb3 rb123 gb 180126

[mm]
TAP16R 87x87x53
TEP44 87x87x55
RTX54 82x88x25
SKG30 115x85x40
PDK65 102x70x50
88x88x39
PDK65S 102x70x50
RB3 155x87x43
RB123 155x87x43
2018-01-26
TAP16R RB3RTX54 RB123
SKG30
PDK65
PDK65S
TEP44
Protective enclosure for TAP16R, IP44
Black bulb sensor, NTC10KΩ, IP30
External room temperature sensor, NTC10KΩ, IP54
Presence detector with power supply (up to 5 detectors), 230V~, max 2,3 kW, IP42/IP65
Relaybox 400V3N~, 16A, IP44
Relaybox with 3 step output control, 400V3N~, 16A, IP44
TAP16R, electronic thermostat
Programmable thermostat for room/floor heating.
Processor controlled with digital display and built-in
clock. A number of weekly preset programs simplify
programming. Several advanced features are included
such as adaptive function, open window mode, energy
saving and frost protection programs.
Setting range: +5 - +37 °C. 230V.
Max. breaking current: 16A. IP21.
TEP44, protective enclosure for TAP16R
Enclosure which is required should TAP16R be used
in environments which demand IP44 and used in
conjunction with external room temperature sensor
(RTX54) which replaces the internal sensor.
RTX54, external room temperature sensor
Replaces internal sensor when using TEP44. Can also
be used to achieve an improved detection point in the
room when locating the control unit in order that the
internal room temperature sensor does not show a
relevant value. NTC10KΩ. IP54.
SKG30, black bulb sensor
Measures air and radiation temperature. High-quality
thermistor. NTC10KΩ. IP30.
PDK65, presence detector with power supply
Complete system including simple installation, for
presence control in smaller rooms. Consists of a
presence detector, power supply and 3 m cable. The
presence detector (IP42) is a passive IR detector which
is connected via a low voltage cable and placed in the
best location for detection. The power supply (IP65) can
power up to 5 detectors. External potential-free contacts
can be connected. 230V~, max 2.3 kW.
Max. start current: 288 A.
PDK65S, additional presence detector to PDK65
Up to 5 detectors can be connected to the same power
supply with the PDK65. The passive IR detectors can be
connected using low voltage cable and placed in the best
location for detection. IP42.
RB3, relaybox 400V3N~
Relay box which is required in order to enable
controlling 230V3~/400V2~/400V3N ~ units with
TAP16R. Max. breaking current: 16A. IP44.
RB123, relaybox with 3 step output control
Relay box which is required in order to enable
controlling 230V3~/400V2~/400V3N ~ units with
TAP16R. 3 step output control and on/off.
Max. breaking current: 16A. IP44.
Type
Description
Design and specifications are subject to change without notice.
Electronic thermostat, IP21
HxWxD
Additional presence detector to PDK65, IP42