dop ajr,aj8(b)008

Declaration of Performance
1 (4)AJR(B), AJ8(B) / F300 (120)/315-400 mm_008
AJR(B), AJ8(B) / F300 (120)/315-400 mm_008
GB
1
Unique identification code of the
product-type:
AJR/AJ8 315...400
1
-x/x (B)
2
1
Nominal diameter of the fan
x: Number of poles
2
tested 300 °C / 2 h
All Systemair AJR/AJ8 fans with the identifier (B) have the performance
stated in this document.
2
Serial number see name plate of the fan
3
Intended use: Mechanical smoke and heat extraction device
4
Manufacturer:
Systemair GmbH; Seehöfer Straße 45; 97944 Boxberg; Germany
6
System of AVCP:
System 1
7
Harmonised standard:
DIN EN 12101-3; 2015
Notified body:
The international research laboratory BSRIA in Bracknell; UK (authorised
testing authority N° 0480) has determined the characteristics of the product
after an initial test. The authorised testing authority BSI (N° 2797) has
carried out an initial factory inspection and a factory production control
according to system 1 of the Construction Products Regulation (Regulation
(EU) No 305/2011). The testing authority carries out ongoing monitoring,
assessment and evaluation of the factory production control and issued the
following certificates of performance:
• 2797-CPR-719672 (EU)
• 0086-CPR-719672 (UK)
8
Essential Characteristics (DIN EN 12101-3; 2015):
Response delay:
Opening under wind load within a
given time.
NPD (No Performance Determined)
Opening under snow load within a
given time.
NPD
Operational reliability
Application categories
see Annex 1
Motor rating ISO H
Effectiveness of smoke / hot gas extraction
Gas flow maintenance during
smoke and heat extraction test.
+/- 10 %
Pressure maintenance during
smoke and heat extraction test.
+/- 20 %
Systemair·GmbH,·Seehöfer·Straße·45,·97944·Boxberg,·Germany
Phone: [phone] Fax: [phone] -en_GB-