L BAL E263

regulations, EU directives, rules for the prevention of accidents
and the corresponding national as well as regional and in-house
regulations.
•
It is strictly forbidden for work to be carried out on any
components while they are connected to live voltage.
•
The safe isolation from the supply must be checked using a two-
pole voltage detector.
•
The owner is obliged to ensure that the device is operated in
perfect working order only.
•
Inspect electrical equipment periodically: retighten loose con-
nections – immediately replace damaged lines and cables.
•
Never clean electrical equipment with water or similar liquids.
•
A separate fault and performance monitoring-system with an
alarm signal function is necessary in order to prevent personal
injuries and material damages during malfunctions and in case
the device fails. Substitute operation must be taken into
consideration!
Intended use
These devices are intended exclusively for measured value ac-
quisition of differential pressures (non-aggressive gases). Their
operation is only permitted under observance of the specifications
in these operating instructions.
Any other use above and beyond this will be considered as im-
proper use. The manufacturer will not be liable for any damage
resulting from this. The company using it bears the sole risk.
3 Product overview
3.1 Function
Sensor-control module with differential-pressure sensors in proven
ceramic-cantilever technology for climate and clean-room applica-
tion.
Operating Instructions PCA1000/6000D2 Product overview
L-BAL-E263-GB 1551 Index 001 Part.-No. 00163445-42
5/20