L BAL E263

7.3 Menu structure
100 Pa
Δp
Display after turning on the voltage supply.
Switch over between actual value display and
“INFO” with the key shortcut for Escape (Esc
= ▼ + ▲).
INFO
Selection of the menu group (e.g. BASE SETUP) to the right
through the ▼-key, to the left through the ▲-key.
Youcangotothemenuitemsinthemenugroups (e.g. mode) by using
the P key. Use the arrow keys to move up and down within the
menu group.
To make adjustments, press the P key after selecting the menu
item. If the previously set value starts to flash, it can be adjusted
with the ▼ + ▲ keys and then saved with the P key. To exit the
menu without making any changes, use the “Esc” short-key, i.e.,
the originally set values remain.
Example for Mode
4.01 (Factory setting)
INFO
▼
▲
SETTING
▼
▲
BASE SETUP
P↓ ↑ Esc
P↓ ↑ Esc P↓ ↑ Esc
100 Pa
Δp
100 Pa
Setpoint 1
4.01
Mode
▲ ▼
▲ ▼ ▲ ▼
100 Pa
Setpoint 1
100 Pa
Setpoint 2
1: metric
Units
▲ ▼
▲ ▼ ▲ ▼
Reprogramming Mode
4.01 to 5.00 in “BASE SETUP”
1 2 3
4
5 6 7
4.01
Mode
P
«4.01»
Mode
▲
«5.00»
Mode
P
5.00
Mode
Operating Instructions PCA1000/6000D2 Programming
L-BAL-E263-GB 1551 Index 001 Part.-No. 00163445-42
12/20