L BAL E263

5.4 Input for switch over Setpoint 1/ 2
Via voltage at terminals “1” and “2” (10... 24 V DC) a switchover
between Setpoint 1 and Setpoint 2 is possible (note polarity
connection diagram).
•
Voltage OFF => Setting “Setpoint 1” active
•
Voltage ON => Setting “Setpoint 2” active
Setpoint 1active Setpoint 2 active
100 Pa
(0.401 in.wg)
Δp
The active Setpoint is indicated in the
menu INFO, an active “Setpoint 2” is
signalized by the moon symbol.
80 Pa
(0.321 in.wg)
Δp
Operating Instructions PCA1000/6000D2 Electrical installation
L-BAL-E263-GB 1551 Index 001 Part.-No. 00163445-42
9/20