Original instructions AR200 SE .... 15 GB .... 19 ES .... 38 NL .... 43 NO .... 24 IT .... 48 FR .... 28 RU .... 53 DE ....
AR200 Dimensions and connections AR210/AR215 M8 494 449 1002/1512 392 198 210 940/1450 432 AR210/215A/E 40 275 20 1042/1552 DN15 (1/2”) 92/96 20 AR220 2003 960 (W), 1000 (A/E) 980 (W), 940 (A/E) 40 275 20 2042 AR220A/E 2 1002 20
AR200 Mounting and installation Fig. 1: The mounting brackets on delivery. Fig. 2: Mounting on threaded bars. AR 90° 1 Fig. 3: Removal of bottom plate 2 Service hatch Fig.
AR200 Mounting and installation Minimum distance Min 1,8 m Fig. 5 Minimum distance to the floor for AR200E.
AR200 Accessories Controls SIRe SIReB SIReAC SIReAA SIReB1XAE SIReB1XAW SIReBXE SIReCXE SIReAXE SIReRTX SIReUR SIReWTA SIReCJ4 SIReCJ6 SIReCC603 SIReCC605 SIReCC610 SIReCC615 SIReCC640 SIReCC403 SIReCC405 SIReCC410 SIReCC415 C AR200E AR200A/W SIReB SIReBXE SIReAC/SIReAA SIRECXE/SIReAXE SIReB1XA 70x33x23 mm 114x70x50 mm SIReWTA 3m 5m 10 m 15 m 40 m 3m 5m 10 m 15 SIReUR SIReCJ4/SIReCJ6 SIReRTX SIReCC The air curtain can also be regulated by control box CB30/32N, see www.frico.se.
AR200 Wiring diagrams AR200 E SIRe SIReB1XN SIReB1XN F5 F4 F3 F2 F1 N N L H2 H1 N TRANSFORMER MOTOR HEATING B1 MOTOR INTERNAL PROTECTION SENSOR C2 C1 ROOM ACTUATOR 230V SUPPLY 230V N L~ L PE N L Parallel connection of multiple units: please see separate SIRe Quick Guide Original instructions Original instructions Original instructions SIRe Basic SIRe Competent SIRe Advanced SIReB SIRe AC SIRe FC SIRe AA SIRe FA SIRE FAWM Quick guide Quick guide Quick guide C 6 SE . GB . DE .
AR200 Wiring diagrams AR200 A/W SIRe AR210W AR215W AR220W M ~ °C Blue Brown Black Brown Black Blue 2 3 1 3 L N 1 2 3 4 5 6 1 230V~ 230V~ SIReB1XN SIReB1XN F5 F4 F3 F2 F1 N N L H2 H1 N TRANSFORMER MOTOR HEATING B1 MOTOR INTERNAL PROTECTION SENSOR C2 C1 ROOM ACTUATOR 230V SUPPLY 230V N L~ L PE N L 7
AR200 Wiring diagrams AR200 E Switching box (Brass plates) Group 2 AR210E09 AR215E11 AR220E18 Group 1 400V3~ 8 230V~
AR200 9
AR200 10
AR200 11
AR200 Output charts water AR200 AR200 W Type AR210W AR215W AR220W Type AR210W AR215W AR220W Type AR210W AR215W AR220W Type AR210W AR215W AR220W Fan Airflow position [m3/h] max 1000 min 700 max 1600 min 1000 max 2000 min 1400 Supply water temperature:110 °C Room temperature: +18 °C Outlet air temperature: +35 °C*1 Output Return water Water temp.
AR200 Output charts water AR200 AR200 W Type AR210W AR215W AR220W Type AR210W AR215W AR220W Fan Airflow position [m3/h] max 1000 min 700 max 1600 min 1000 max 2000 min 1400 Fan Airflow position [m3/h] max 1000 min 700 max 1600 min 1000 max 2000 min 1400 Supply water temperature: 60 °C Room temperature: +18 °C Outlet air temperature: +35 °C*1 Output Return water Water temp.
AR200 Technical specifications | AR200 A without heat 1 Type Output Airflow*1 AR210A AR215A AR220A [kW] 0 0 0 [m3/h] 650/1200 950/1750 1300/2400 Technical specifications Type Output steps 400V3N~ [kW] AR210E09 3 6/9 AR215E11 4,5 6,8/11,3 AR220E18 6 12/18 - Sound pressure*3 [dB(A)] 34/50 34/50 40/54 Voltage Amperage Length Weight [V] 230V~ 230V~ 230V~ [A] 0,5 0,6 1,0 [mm] 1042 1552 2042 [kg] 18 25 36 | AR200 E electrically heated 3 Output steps 230V~ [kW] 3 3/5 4,5 4,5/6,8 6 6/10 Technica
AR200 GB Assembly and operating instructions General Instructions Read these instructions carefully before installation and use. Keep this manual for future reference. The guarantee is only valid if the units are used in the manner intended by the manufacturer and in accordance with the Frico mounting and operating instructions. Application area AR200 is especially suited for environments with high demands in respect of design.
AR200 GB 3. Close the base plate/service hatch and make sure that the snap fixings lock properly. See wiring diagrams. AR200E: The units can be switched between different outputs and for 230V~/400V3~. The connection box is located on the right side of the unit, viewed from inside the room. The switching block is on the left side. On the 2 metre unit, the two switching blocks are located in the middle and the connection spaces are on the outside. The 2-metre unit requires dual power supplies.
AR200 Service, repairs and maintenance For all service, repair and maintenance first carry out the following: 1. Disconnect the power supply. 2.The base plate/service hatch is opened by loosening the snap fixings located on the down side (turn 90°) and then loosening the base plate from the rim. See fig. 3 and 4. 3. After service, repair and maintenance close the base plate/service hatch and make sure that the snap fixings lock properly.
GB AR200 Trouble shooting If the fans are not working or do not blow properly, check the following: • Operating power supply to the unit; check fuses, circuit-breaker, time switch/ thermostat (if any) that starts and stops the unit. • That the air flow selector is correctly set. • That the position limit switch is working. • That the overheat protection for the motors has not been deployed. • That the intake grille is not dirty.
AR200 GB • Children of less than 3 years should be kept away unless continuously supervised. • Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Tel: +46 31 336 86 00 mailbox@frico.se www.frico.net For latest updated information and information about your local contact: www.frico.se Art.no.
