Topvex SoftCooler SR Installation instructions CE208765 A005
Table Of Contents
- 1 Declaration of Conformity
- 2 Warnings
- 3 Refrigerant Control/Reporting
- 4 Product information
- 5 Transport and storage
- 6 Installation
- 7 Function Description
- 8 Commissioning protocol
Installation |
9
6.4 Dividing the Topvex SR air handling unit
Before the installation of Topvex SoftCooler SR the Topvex SR has to be divided (figure 5).
How to split the unit:
Remove the heat exchanger, supply air fan and the extract air filter
A. Loosen the cable connectors in the wall
B. The two halves of the unit are joined using 4 M10 screws, one in each corner
C. Control section
D. Heat recovery section
E. It is possible dismount the gables by removing 6 MRX M6 screws with TH2 bits tool
Reassemble in the reverse order.
Fig. 5 Left hand version
Note:
When reassembling the pieces make sure they are connected correctly - see cable markings on the side of
the cables.
208765 | A005