Installation Instruction
Table Of Contents
- 1 Product information
- 2 Overview
- 3 Warnings
- 4 Unloading from trailer
- 5 Transport and storage
- 6 Unpacking
- 7 Duct connections
- 8 Internal components
- 9 Installation
- 10 Purge sector
- 11 Electrical connections
- 12 Connect the water heating coil
- 13 Access control system
- 14 Connect accessories in Control unit CU27-C
- 15 Dimension and weight
- 16 Technical data
- 17 Additional equipment
- 18 Disposal
- 19 EU Declaration of Conformity
- 20 UK Declaration of Conformity
4
| Transport and storage
4.2 Using lifting frame
Warning
• Secure the lifting straps on the lifting bars.
• Do not compress the air handling unit's chassi with the lifting straps.
Use a lifting frame connected to lifting bars in the air handling unit's feet. Use lifting straps with sufficient lifting
capacity.
1. Loosen the screws attaching the air handling unit to the pallet
Fig. 2
2. Place the lifting bars in the outer feet of the air handling unit.
3. Attach the lifting straps to the lifting bars.
Fig. 3 Lift the sections separate for size Topvex SR60–Topvex SR70 and Topvex TR60–Topvex TR80.
5 Transport and storage
The air handling unit is fastened on the pallet. If possible keep the air handling unit fastened on the pallet until the air
handling unit is on installation location.
5.1 Storage
Store the unit covered from dust, rain and snow. Keep duct connections covered during storage and installation.
254050 | A004