Connect User Guide

| 9
Systemair Connect | User guide
Two functions are available for building the substructure on your account:
Area
Device
Used to divide the installation in several small areas, example buildings, floor plans or
rooms. It is possible to restrict user access using the Area. For example, Area can be
used if you want to split the installation in 2 areas where you have separate users
responsible for each area.
This function is used when you link an air handling unit controller to Systemair
Connect. It is possible to restrict user access to using the Device.
Create Area
Ensure that user is logged in with SysAdmin
access level. Press button [Action] next to the
account name and then select New Area.
Under the account The customer two areas are
created: Building1 and Building2. Property
“Name” for the Area is mandatory to fill in but it
is recommended to also use “Description” and
“Comment” fields. Finish by pressing [Create
Area].
It is possible to create one or several sub Areas
under each Area. It provides the opportunity to
build a structure in many levels. The structure
can be used to provide users access to specific
areas and devices they are responsible for. An
example can be found in the chapter Create User.